Get 2026 Free VMware 3V0-23.25 Exam Practice Materials Collection [Q22-Q41]

Share

Get 2026 Free VMware 3V0-23.25 Exam Practice Materials Collection

Get Latest and 100% Accurate 3V0-23.25 Exam Questions

NEW QUESTION # 22
A Compliance Auditor is investigating a VCF 9.0 Stretched Cluster failover event. The cluster uses vSAN Data-at-Rest Encryption (D@RE) tied to an external Key Management Server (KMS) cluster.
```
[Log Snippet: vpxd.log - Site A Failure]
2026-11-20T10:00:00Z FATAL hostd [Site A] - Power lost.
2026-11-20T10:00:05Z INFO vpxd - Quorum maintained via Witness + Site B.
2026-11-20T10:00:10Z INFO vpxd - Initiating HA Restart on Site B hosts.
2026-11-20T10:00:15Z WARN vpxd - KMS Server 'KMS-SiteA-01' unreachable.
```
How do the deep architectural dependencies between vSAN Encryption, vSphere HA, and KMS topology ensure the encrypted VMs successfully restart on Site B despite the loss of the Site A KMS? (Select all that apply.)

  • A. Site B hosts must independently retrieve the Key Encryption Key (KEK) from the surviving KMS instance in the KMS cluster (KMS-SiteB-02) to unwrap the local Disk Encryption Keys (DEKs).
  • B. The Witness Appliance automatically functions as a backup Key Provider when the primary KMS server fails.
  • C. If the Site B ESXi hosts were cold-rebooted during the power outage, they would require active communication with the surviving KMS to mount the vSAN datastore.
  • D. vSAN maintains standard storage accessibility because the ESXi hosts on Site B hold the KEKs in their local secure memory cache; they do not need to query the KMS to continue standard I/O during a failover.
  • E. VCF automatically replicates the cleartext encryption keys across the vSAN Inter-Site Link to prevent lockouts.

Answer: A,C,D


NEW QUESTION # 23
A Compliance Auditor is tracking the success of an automated "Shallow Rekey" task scheduled across a massive VCF 9.0 multi-cluster environment. The task failed on a specific vSAN Stretched Cluster.
```
[Skyline Health > vSAN > Encryption Health]
Status: Warning
Message: "KMS Server unreachable on Host esx-04. Rekey Aborted."
[Architecture Details]
esx-04 is part of the Secondary Site. The Inter-Site Link is currently
DOWN (Partition).
```
How does the vSAN encryption architecture prevent data loss and split-brain when a Rekey operation hits a partitioned cluster? (Choose 2.)

  • A. esx-04 will instantly cryptographically shred its local drives to prevent data compromise during the network partition.
  • B. The DOM Client forces esx-04 to perform a Deep Rekey using the vSphere TPM chip to bypass the KMS outage.
  • C. Even though the Rekey failed, the virtual machines on the surviving site remain fully operational because the ESXi hosts maintain the *current* KEK cached in their secure RAM, requiring no active KMS connection to serve I/O.
  • D. The Shallow Rekey operation is strictly an atomic transaction; if esx-04 cannot reach the KMS to receive the new Key Encryption Key (KEK), the vCenter master node rolls back the KEK on all other hosts to ensure cluster-wide key consistency.
  • E. esx-04 will automatically fallback to the local Witness appliance to generate a temporary KEK until the network is restored.

Answer: C,D


NEW QUESTION # 24
A financial organization successfully deployed a new Workload Domain in VMware Cloud Foundation (VCF) using NFS storage. All ESX hosts are commissioned and connected to the same storage network. The system administrator is tasked to configure a new NFS datastore in the existing cluster.
Which two steps are correct? (Choose two.)

  • A. Create an NFS export on the storage array.
  • B. Mount the NFS datastore on one ESX host in the cluster.
  • C. Configure vSAN on all hosts.
  • D. Attach NFS as a secondary datastore.
  • E. Mount the NFS datastore on each ESX host in the cluster.

Answer: A,E

Explanation:
The correct steps are to create an NFS export on the storage array and mount the NFS datastore on each ESX host in the cluster. NFS datastore creation begins on the storage system, where the storage administrator creates and exports the NFS volume or directory with the required access permissions for the ESX hosts. After the export exists, vSphere mounts that export as a datastore. For a clustered VCF workload domain, the datastore must be mounted consistently across all ESX hosts in the cluster so that HA, DRS, vMotion, and VM placement can operate correctly. Mounting the datastore on only one host would create inconsistent datastore accessibility and could prevent workloads from moving or restarting on other hosts. "Attach NFS as a secondary datastore" is not the correct procedural step; the datastore is created and mounted as a vSphere datastore. Configuring vSAN is irrelevant because the workload domain already uses NFS storage and the task is to add another NFS datastore. Reference topics: NFS Datastore Creation, NFS Export, Host Accessibility, VCF Workload Domain Storage Administration.


NEW QUESTION # 25
A Storage Administrator is troubleshooting a vSAN Stretched Cluster configuration. The administrator successfully executed a Deep Rekey operation on the Preferred and Secondary data sites, but suspects the Witness Appliance was excluded from the cryptographic rotation.
The administrator queries the encryption status of the Witness Appliance via the Ruby vSphere Console (RVC):
```
[RVC Output: vsan.encryption_info ~cluster]
Host: esx-site-a-01 | DEK Gen: 2 | KEK ID: kms-ext-key-002
Host: esx-site-b-01 | DEK Gen: 2 | KEK ID: kms-ext-key-002
Host: witness-01 | DEK Gen: 1 | KEK ID: kms-ext-key-001
```
Based on the RVC output and Stretched Cluster mechanics, what are the implications of this state, and how is the interaction handled? (Select all that apply.)

  • A. This inconsistent state prevents the data hosts from forming a quorum with the Witness because the CMMDS metadata cannot be decrypted across different KEK versions.
  • B. The Witness Appliance failed to Deep Rekey because it runs a different vSAN storage protocol that does not support Disk Encryption Keys (DEKs).
  • C. The output confirms the Witness Appliance is in an inconsistent state (DEK Gen: 1 vs data hosts Gen:
    2); the Deep Rekey workflow likely failed to reach the Witness via the management network.
  • D. The administrator must initiate a manual Deep Rekey specifically targeting the witness-01 host to bring its DEK generation and KEK ID in line with the data sites.

Answer: C,D


NEW QUESTION # 26
A Compliance Auditor is reviewing the storage state of a Tanzu environment hosted on VCF. The auditor notices a critical "Orphaned CNS Volumes" warning in the Skyline Health dashboard.
```
[Skyline Health > Cloud Native Storage]
CNS Volume Health
Volume ID: 52a1... (pvc-finance-db)
SPBM Compliance: N/A
Issue: Shadow / Orphaned Volume
```
Upon investigation, a junior administrator admits they used the vCenter GUI to delete the underlying First Class Disk (FCD) VMDK to free up space, because the Kubernetes Pod using it was temporarily powered off.
Which TWO statements accurately describe the resulting architectural anti-pattern and its consequence? (Choose 2.)

  • A. CNS will automatically detect the missing FCD and trigger a vSAN DOM re-sync to reconstruct the deleted disk from the Witness metadata.
  • B. The junior admin successfully reclaimed the space; Kubernetes will automatically regenerate the data from the container image when the pod restarts.
  • C. The Kubernetes pod will fail to start and enter a "CrashLoopBackOff" state because the CSI driver cannot mount the physical backing disk that was deleted.
  • D. Deleting the FCD via vCenter breaks the Control Plane integration; Kubernetes still believes the Persistent Volume (PV) exists, leaving the cluster in a "Shadow" out-of-sync state.
  • E. First Class Disks (FCDs) are ephemeral by definition and should be deleted manually whenever a pod shuts down to maintain cluster efficiency.

Answer: C,D


NEW QUESTION # 27
As part of standard operating procedures, when an administrator leaves the organization, a shallow rekey operation must be performed on a vSAN ESA cluster with vSAN Data-at-Rest Encryption enabled.
Which key is rotated during a shallow rekey operation?

  • A. Key Derivation Key
  • B. Key Encryption Key
  • C. Disk Encryption Key
  • D. Host Key

Answer: B

Explanation:
A shallow rekey operation rotates only the Key Encryption Key (KEK). In vSAN Data-at-Rest Encryption, vCenter obtains or generates the KEK through the configured key provider, while ESX hosts use Data Encryption Keys (DEKs) to encrypt the actual disk or object data. The KEK is used to protect, or wrap, those DEKs. When a shallow rekey is performed, the underlying encrypted data does not need to be rewritten because the DEKs remain the same; only the KEK changes, and the existing DEKs are re-encrypted with the new KEK. This is why shallow rekey is faster and less disruptive than a deep rekey. A deep rekey generates both a new KEK and new DEKs, requiring re-encryption of data. The Host Key is used for encrypted core dumps, not datastore data encryption. Key Derivation Key is not the key rotated in this vSAN shallow rekey workflow. Reference topics: vSAN Data-at-Rest Encryption, Generate New Encryption Keys, Shallow Rekey, Deep Rekey, KEK and DEK lifecycle.


NEW QUESTION # 28
A VI Admin is managing disk failures in a secure VCF environment utilizing vSAN Data-at-Rest Encryption via an external KMS.
A single 3.84 TB capacity NVMe drive on esx-01 reports severe media degradation. The Admin needs to physically replace the drive.
```
# Operations Log
Step 1: Place host esx-01 in Maintenance Mode (No Data Migration).
Step 2: Use GUI to unclaim the failed drive from the vSAN Storage Pool.
Step 3: Physically swap the failed NVMe device with a new one.
Step 4: Use GUI to claim the new NVMe device into the vSAN Storage Pool.
```
How do the vSAN Data-at-Rest Encryption mechanics interact with the replacement NVMe drive during Step 4? (Select all that apply.)

  • A. The VCF admin must manually install the Key Encryption Key (KEK) onto the new NVMe drive via the console before vSAN will accept it.
  • B. The new DEK for the replacement drive is wrapped (encrypted) by the existing KEK shared by the cluster, meaning no active communication with the external KMS is required at the exact moment of insertion.
  • C. During the "claim" process, the ESXi host generates a brand new Disk Encryption Key (DEK) specifically for that physical NVMe drive.
  • D. The failed NVMe drive that was removed contains fully encrypted data blocks; without the corresponding KEK from the KMS, the data on the removed drive is cryptographically shredded and safe for RMA (Return Merchandise Authorization).

Answer: B,C,D


NEW QUESTION # 29
An Infrastructure Manager is sizing the "Operations Reserve" for a VCF 9.0 Workload Domain.
The developers plan to use vSAN Data Protection with highly aggressive snapshot schedules for their CI/CD pipelines (e.g., snapshots every 15 minutes, retaining 48 hours).
```
[SDDC Manager - Capacity Configuration]
Default vSAN Thresholds
Host Rebuild Reserve: 15% (Enabled)
Operations Reserve: 5% (Customized)
```
Historically, the manager lowered the Operations Reserve to 5% to grant more capacity to VMs.
How does the interaction of heavy snapshot activity and this customized Operations Reserve directly impact the cluster's stability and performance? (Select all that apply.)

  • A. Deep snapshot chains generate significant metadata overhead; when background snapshot deletions occur, they consume temporary staging space which can quickly exhaust a 5% Operations Reserve.
  • B. The system will fail to delete older snapshots when the retention limit is reached if the Operations Reserve is full, causing the datastore to rapidly fill to 100%.
  • C. vSAN ESA snapshots do not consume Operations Reserve space because they are log- structured B- tree pointers, making the 5% setting perfectly safe.
  • D. If the Operations Reserve is exhausted by snapshot consolidation overhead, vSAN will throttle incoming VM write I/O to zero to prevent datastore corruption.

Answer: A,B,D


NEW QUESTION # 30
An L3 Support Engineer is configuring a VCF 9.0 vSAN Stretched Cluster. The cluster includes two sites (Preferred and Secondary).
The goal is to ensure Tier-1 database VMs strictly run on the Preferred Site during normal operations, but gracefully failover to the Secondary Site if the Preferred Site burns down.
The engineer uses Ruby vSphere Console (RVC) to check cluster state while configuring vSphere DRS.
```
[RVC Output: vsan.stretchedcluster_config]
Preferred Site: esx-01, esx-02, esx-03
Secondary Site: esx-04, esx-05, esx-06
```
Which TWO configurations MUST the engineer apply to the DRS Host/VM Groups to satisfy this DR requirement? (Choose 2.)

  • A. The engineer must apply a "SHOULD run on hosts in group" DRS rule; this keeps the VMs on the Preferred site normally, but allows vSphere HA to violate the rule and restart them on the Secondary site during a total site failure.
  • B. The engineer must create a DRS "Host Group" containing ONLY the Preferred Site hosts (esx-01 through esx-03).
  • C. The engineer must disable DRS Automation (set to Manual) to prevent VMs from accidentally moving to the Secondary site during daytime high CPU loads.
  • D. The engineer must apply a "MUST run on hosts in group" DRS rule for the VMs; "MUST" ensures that HA can strictly map the IPs during failover.
  • E. The engineer must map the DRS VM groups directly to the vSAN Unicast Agent tables via CLI.

Answer: A,B


NEW QUESTION # 31
Match each vSAN storage attribute with its correct description.

Answer:

Explanation:

Explanation:
vSAN HCI Cluster = A cluster that provides both compute and storage to Virtual Machines; vSAN Storage Cluster = A vSAN cluster that provides disaggregated storage for vSAN and vSphere clusters; vSAN Compute Cluster = A vSphere cluster that does not have local vSAN storage, but instead, it mounts a remote vSAN datastore; vSAN Stretched Cluster = A vSAN Cluster topology that extends a single logical vSAN cluster across two availability zones. A vSAN stretched cluster can tolerate a site failure.
These mappings describe the primary vSAN storage models used in VMware Cloud Foundation 9.0. A vSAN HCI Cluster is the traditional hyperconverged model where the same cluster provides compute resources and contributes local storage devices to the vSAN datastore for running virtual machines. A vSAN Storage Cluster is a disaggregated storage model based on vSAN ESA; it provides storage capacity and performance to other vSAN or vSphere clusters instead of primarily running workloads itself. A vSAN Compute Cluster is a vSphere cluster that does not contribute local vSAN capacity.
Instead, it consumes a remote datastore exported by a vSAN Storage Cluster, enabling compute and storage to scale separately. A vSAN Stretched Cluster extends a single logical vSAN cluster across two availability zones or sites and uses a witness to maintain quorum, allowing workloads to tolerate a full site failure. These distinctions are essential for choosing between HCI, disaggregated storage, remote storage consumption, and availability-zone resilience. Reference topics: vSAN HCI Cluster, vSAN Storage Cluster, vSAN Compute Cluster, vSAN Stretched Cluster, VCF Storage Models.


NEW QUESTION # 32
An administrator needs to monitor an external NFS datastore attached to a VMware Cloud Foundation (VCF) cluster to confirm that it meets latency and throughput targets.
Drag and drop the three correct options to monitor NFS performance from the Options list on the left and place them into the Valid Actions on the right in any order. (Choose three.)

Answer:

Explanation:

Explanation:
Run the esxcli storage nfs list command.
Use vCenter Datastore Performance view to monitor NFS datastore latency, IOPS and throughput.
Create a vCenter performance alarm for "Datastore Latency (NFS)" to trigger when thresholds are exceeded.
The correct monitoring workflow is to verify NFS datastore presentation at the host layer, then use vCenter performance views and alarms for operational monitoring. The esxcli storage nfs list command confirms that the NFS datastore is mounted and visible to the ESX host, which is the first validation point before any performance assessment. vCenter Datastore Performance views provide the correct datastore-level telemetry for latency, IOPS, and throughput, including NFS-backed datastores.
Creating a vCenter performance alarm for NFS datastore latency allows proactive alerting when the datastore exceeds the required latency threshold. The esxcli storage core device list command is intended for block storage devices and paths, not NFS datastores. The --verbose NFS option listed here is not the required method for collecting detailed performance metrics in this scenario. VCF Operations Logs is log-focused, not the correct graph source for NFS throughput validation. vSAN Performance Service applies to vSAN performance, not external NFS datastore monitoring. Reference topics: NFS Datastore Monitoring, vCenter Datastore Performance, NFS Host Validation, vCenter Performance Alarms.


NEW QUESTION # 33
A CTO is evaluating the performance and operational overhead of implementing Fibre Channel vVols versus migrating fully to vSAN ESA for a massive VCF database Workload Domain.
```
[Architecture Evaluation Matrix]
FC vVols: Requires VASA Provider, FC Zoning, Protocol Endpoints
vSAN ESA: Requires NVMe Direct-Attach, 25GbE/100GbE, SPBM Native
```
The CTO wants to maximize database IOPS while minimizing the complexity of storage management. Which of the following statements correctly evaluate the trade-offs between FC vVols and vSAN ESA? (Select all that apply.)

  • A. Both architectures eliminate the "noisy neighbor" VMFS queue limitation by providing dedicated I/O queues per virtual machine disk.
  • B. FC vVols require masking individual databases (vVols) to the ESXi hosts through the FC fabric, significantly increasing the complexity of SAN zoning compared to traditional LUNs.
  • C. A single Protocol Endpoint in vVols can demultiplex thousands of individual VMDKs, keeping the ESXi SCSI topology map small despite the massive number of sub-LUN objects.
  • D. vVols offload snapshot and clone operations directly to the physical SAN array via VASA, consuming zero host CPU cycles, whereas vSAN ESA consumes host CPU for these operations.
  • E. vSAN ESA natively integrates the SPBM control plane into the hypervisor kernel, whereas vVols introduce an external VASA dependency which can become a single point of management failure.

Answer: A,C,D,E


NEW QUESTION # 34
Which RAID configuration provides the highest fault tolerance in vSAN?

  • A. RAID 5
  • B. RAID 1
  • C. RAID 6
  • D. RAID 0

Answer: C


NEW QUESTION # 35
In a vSAN ESA cluster, one host goes offline unexpectedly for more than an hour.
When it returns online, vSAN needs to rebuild and restore compliance for several objects that became degraded during the outage.
Drag and drop the three correct options for the automatic recovery process from the Options list on the left and place them into the Valid Actions on the right in any order. (Choose three.)

Answer:

Explanation:

Explanation:
The Repair Delay Timer expires, and vSAN starts automatic repair evaluation.
Once data resync completes, objects are marked as Compliant again.
vSAN verifies policy requirements and rebuilds missing components on available capacity devices.
When a host goes offline unexpectedly, vSAN treats the missing components as absent and waits for the configured repair delay timer before initiating rebuild operations. This prevents unnecessary resynchronization when a host or device returns quickly. In this scenario, the host is offline for more than an hour, so the repair delay timer expires and vSAN begins automatic repair evaluation. vSAN then checks the assigned storage policies, available capacity, and fault-domain placement requirements to determine whether missing components can be rebuilt safely on available capacity devices. If sufficient capacity and fault domains exist, vSAN creates replacement components and starts resynchronization. When the resync process finishes and the affected objects again satisfy their assigned policies, the objects are marked Compliant. The administrator does not need to manually run a resync task from vCenter, and the host does not need to be placed into maintenance mode for automatic repair. A full cluster rebalance is a separate capacity-balancing operation and is not required before object repair. Reference topics: vSAN Repair Delay Timer, Object Compliance, Resynchronization, ESA Object Repair.


NEW QUESTION # 36
An administrator has successfully deployed a vSAN Stretched Cluster and needs to ensure that any Virtual Machines (VMs) that are created are placed in the appropriate site.
Which two steps are required to complete the task? (Choose two.)

  • A. Create a storage policy for each site.
  • B. Create a VM/Host group across the two sites.
  • C. Put the VMs in the correct DRS Group.
  • D. Create VM/Host groups for the two sites.
  • E. Put the VMs in the correct VM Folder.

Answer: A,D

Explanation:
A vSAN Stretched Cluster requires both compute placement control and storage placement control. To place virtual machines in the appropriate site, the administrator must create VM/Host groups for the two sites. This allows DRS to understand which hosts belong to the preferred site and which hosts belong to the secondary site, and it allows VM-to-host affinity rules to be created for initial and ongoing placement. The administrator must also create a storage policy for each site or site placement requirement. vSAN stretched-cluster storage policies control site disaster tolerance and data locality, including whether objects are mirrored across sites or kept on the preferred or secondary site. VM folders do not control runtime or storage placement. A VM/Host group "across the two sites" is not correct because site separation must be explicitly modeled. Simply placing a VM into a DRS group is not enough unless the site groups and policies already exist. Reference topics: vSAN Stretched Cluster Design Considerations, DRS Host Groups, VM Groups, VM-Host Rules, vSAN Storage Policy Site Locality.


NEW QUESTION # 37
A VCF Architect is designing a new vSAN Express Storage Architecture (ESA) cluster. The architect is comparing how Objects and Components are handled in the new ESA log-structured filesystem compared to the legacy VMFS-L block structure of vSAN OSA.
```
[Log Snippet: vmkernel.log - vSAN ESA Component Instantiation]
2026-11-20T10:00:00Z INFO vsan-lsom - Object 5543... placed on Storage Pool (NVMe namespace).
2026-11-20T10:00:01Z INFO vsan-dom - Snapshot created. B-Tree metadata updated. Zero delta components generated.
```
Which of the following statements accurately describe the evolution of Object and Component mechanics in vSAN ESA? (Select all that apply.)

  • A. ESA Native Snapshots update the object's B-Tree metadata directly, meaning a snapshot no longer generates a new physical SEsparse "Delta Component" object, vastly reducing component bloat and VM Stun time.
  • B. In ESA, components are no longer bound by the rigid "Disk Group" construct; components span the unified NVMe Storage Pool, allowing the loss of a single NVMe drive to degrade only the components on that drive, rather than failing the entire pool.
  • C. ESA enables highly efficient Erasure Coding (RAID-5/6) at native RAID-1 performance, meaning architects can configure component layouts using fewer components for parity without sacrificing IOPS.
  • D. ESA eliminates the 255 GB physical component size limit, allowing a single 62 TB VMDK to exist as a single physical NVMe component.
  • E. In ESA, standard VMDK objects are converted into Raw Device Mappings (RDMs) that bypass the DOM layer to achieve NVMe line-rate speeds.

Answer: A,B,C


NEW QUESTION # 38
An L3 Support Engineer is replacing a failed NVMe drive on a vSAN ESA host in a VCF Workload Domain.
The engineer physically swaps the failed drive with a brand new, enterprise-grade 7.68 TB NVMe device.
However, SDDC Manager and vCenter refuse to automatically claim the drive into the vSAN Storage Pool.
The engineer checks the Ruby vSphere Console (RVC) output:
```
[RVC Output: vsan.disks_stats ~cluster]
+-------------+----------+-----------+------------+-------------------------------------+
| Device Name | Status | State | Capacity | HCL Compliance |
+-------------+----------+-----------+------------+--------------------------------------+
| naa.5000a...| In-Use | OK | 3.84 TB | Yes |
| naa.5000b...| In-Use | OK | 3.84 TB | Yes |
| naa.5000x...| Unclaimed| Eligible | 7.68 TB | No (Firmware) |
+-------------+----------+-----------+------------+--------------------------------------+
```
What combination of root cause analysis and procedural steps is required to successfully integrate this new drive and restore the cluster to full health? (Select all that apply.)

  • A. The host must be rebooted into Maintenance Mode to allow the NVMe driver module to initialize the new device paths.
  • B. The vSAN HCL (Hardware Compatibility List) database on the vCenter Server is outdated and does not recognize the firmware signature of the newly manufactured NVMe drive.
  • C. The engineer must manually download and update the vSAN HCL database JSON file in vCenter Server to clear the compliance blocker.
  • D. The new 7.68 TB drive is incompatible with the existing 3.84 TB drives; ESA requires all drives in a pool to be of identical capacity.
  • E. Once the HCL database is updated and the firmware is recognized as compliant, the administrator must manually claim the disk into the storage pool, as ESA does not auto-claim post-failure.

Answer: B,C,E


NEW QUESTION # 39
Which statement accurately defines the architectural distinction between a "First Class Disk" (FCD) and a traditional vSphere Virtual Machine Disk (VMDK)?

  • A. An FCD is a first-class named object in vCenter that possesses its own independent lifecycle and identity, decoupling it from any specific virtual machine.
  • B. An FCD does not utilize the vSAN Distributed Object Manager (DOM) for I/O routing; it uses the Container Storage Interface (CSI) directly.
  • C. An FCD is provisioned exclusively on physical NVMe namespaces, while traditional VMDKs are provisioned on VMFS block storage.
  • D. A traditional VMDK supports Storage Policy Based Management (SPBM), whereas an FCD relies on Kubernetes StorageClasses for its redundancy rules.

Answer: A


NEW QUESTION # 40
A VI Admin is planning the expansion of a 3-node vSAN cluster to a 6-node vSAN cluster. The 3- node cluster is currently operating near maximum safe capacity due to the strict "Host Rebuild Reserve" threshold.
```
[Log Snippet: vmkernel.log - Capacity Daemon]
2026-11-20T10:00:00Z WARN vsan-dom - Host Rebuild Reserve active: 33%
of Raw Capacity locked.
2026-11-20T12:00:00Z INFO vpxd - Cluster expansion complete. Host
count: 6.
2026-11-20T12:05:00Z INFO vsan-dom - Host Rebuild Reserve recalculated:
[ ? ]%
```
How does the physical expansion of the cluster mathematically alter the "Host Rebuild Reserve" percentage, and what is the direct impact on usable VM capacity?

  • A. The log indicates that Host Rebuild Reserve is disabled automatically upon reaching 6 nodes because Distributed Resource Scheduler (DRS) handles capacity allocation above the 4-node threshold.
  • B. The reserve percentage remains fixed at 33% to comply with the FTT=1 storage policy, meaning usable capacity scales linearly but overhead remains high.
  • C. The required reserve percentage automatically decreases from 33% down to approximately 16%; this releases a significant portion of previously "locked" storage on the original hosts back into the usable VM capacity pool.
  • D. The reserve percentage increases to 50% because a 6-node cluster inherently carries a higher statistical risk of dual-host failures.

Answer: C


NEW QUESTION # 41
......

Maximum Grades By Making ready With 3V0-23.25 Dumps: https://theexamcerts.lead2passexam.com/VMware/valid-3V0-23.25-exam-dumps.html