Pass Cisco 300-635 Actual Free Exam Q&As Updated Dump Oct 31, 2022
Latest 300-635 Actual Free Exam Updated 76 Questions
NEW QUESTION 25
Refer to the exhibit:
Refer to the exhibit: Which Ansible module is need in line 8 to create a new VLAN 10 on the hosts defined in the "ucs" group?
- A. ucs_vlans
- B. vlan
- C. nxos_vlans
- D. vlans
Answer: A
Explanation:
Reference:
https://docs.ansible.com/ansible/latest/modules/ucs_vlans_module.html
NEW QUESTION 26
What are two capabilities of the DCNM REST API? (Choose two.)
- A. uses the dcnm-token header for requests authentication after initial basic authentication
- B. is separated into Classic LAN, LAN Fabric, Media Controller, and SAN Management categories.
- C. uses basic authentication without encoding for username and password
- D. supports HTTP until release 11.0
- E. uses bearer key authorization
Answer: D,E
NEW QUESTION 27
Which statement about the Layer 3 card on the Cisco Nexus 5500 Series Switch is true?
- A. Port channels cannot be configured as Layer 3 interfaces.
- B. Up to two 4-port cards are supported with up to 160 Gb/s of Layer 3 forwarding capability.
- C. BGP support is not provided, but RIP, EIGRP, and OSPF support is provided.
- D. Up to 16 FEX connections are supported.
Answer: D
Explanation:
From the Cisco NX-OS 5.1(3)N1(1) release and later releases, each Cisco Nexus 5500 Series device can manage and support up to 24 FEXs without Layer 3. With Layer 3, the number of FEXs supported per Cisco Nexus 5500 Series device is 8. With Enhanced vPC and a dual-homed FEX topology each FEX is managed by both Cisco Nexus 5000 Series devices. As a result, one pair of Cisco Nexus 5500 Series devices can support up to 24 FEXs and 16 FEXs for Layer 2 and Layer 3.
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/mkt_ops_guides/513_n1_1/ n5k_enhanced_vpc.html
NEW QUESTION 28
Using the NX-API CLI JSON-RPC interface, which two Python data structure and requests call create an SVI?
(Choose two.)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: B,C
NEW QUESTION 29
Which three VDC resources can be constrained with a resource template? (Choose three.)
- A. IPv6 routes
- B. CLs
- C. RBAC users
- D. NAT entries
- E. IPv4 routes
- F. SPAN sessions
Answer: A,E,F
Explanation:
VDC resource templates set the minimum and maximum limits for shared physical device resources when you create the VDC. The Cisco NX-OS software reserves the minimum limit for the resource to the VDC. Any resources allocated to the VDC beyond the minimum are based on the maximum limit and availability on the device.
You can explicitly specify a VDC resource template, or you can use the default VDC template provided by the Cisco NX-OS software. VDC templates set limits on the following resources:
IPv4 multicast route memory
IPv6 multicast route memory
IPv4 unicast route memory
IPv6 unicast route memory
Port channels
Switch Port Analyzer (SPAN) sessions
VLANs
Virtual routing and forwarding instances (VRFs)
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/virtual_device_context/configuration/guide/ b-7k-Cisco-Nexus-7000-Series-NX-OS-Virtual-Device-Context-Configuration-Guide/vdc-res-template.html
NEW QUESTION 30
During the process of starting a Python network telemetry collector, which command starts the Cisco bigmuddy-network-telemetry-collector from GitHub?
- A. streaming telemetry
- B. model driven telemetry
- C. telemetry_receiver.py --destination <port> -uri <url>
- D. telemetry_receiver.py --ip-address <addr> -port <port>
Answer: D
NEW QUESTION 31
When should the API Inspector be used?
- A. to learn or identify the sequence of API calls for a specific operation in the APIC GUI
- B. to verify the XML structure of an object based on a specific operation in the APIC GUI
- C. to send an API request to the APIC
- D. to launch an Ansible playbook
Answer: A
NEW QUESTION 32
A file named myfunc.py has been edited. Drag and drop the steps from left that ensure that this file is committed to the local Git repository and verify its status into the correct order on the right. NOt all options are used.
Answer:
Explanation:
Explanation
git add .
git commit -m "new function"
git status
NEW QUESTION 33
Which two capabilities apply to the DCNM API? (Choose two.)
- A. Some features of DCNM must be configured through the GUI.
- B. DCNM provides a REST-based API.
- C. All API operations can be performed using the DCNM GUI.
- D. DCNM provides an XML-based SOAP API.
- E. DCNM requires a license to use the API.
Answer: B,D
Explanation:
Section: Data Center Compute
NEW QUESTION 34
Which Cisco UCS PowerTool commands initiate a Cisco UCS Manager connection?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
Section: Data Center Compute
NEW QUESTION 35
Refer to the exhibit.
The code should create a new tenant named Cisco via the Cobra SDK, which shows up after the execution of this script in the APIC dashboard.
Which code must he inserted into the red box to create this tenant?
- A. fvTenant = Tenant('Cisco')
- B. fvTenant = Tenant(topMo, name='Cisco')
- C. tenant = Tenant(topMo. name='Cisco')
- D. fvTenant = NewTenant(name='Cisco')
Answer: B
NEW QUESTION 36
Refer to the exhibit:
The exhibit shows a Cisco NX-OS switch configuration an Ansible playbook, and the output of running this playbook The playbook failed due to error "msg' "Request failed <urlopen error [Errno 61] Connection refused>\ 'status* -1 "url" "http://192.168.251.129:80/ins" Which Cisco NX-OS configuration command resolves this failure?
- A. interface mgmt0; ip access-group allow_http_traffic in
- B. http-server enabled
- C. feature http
- D. feature nxapi
Answer: C
NEW QUESTION 37
How is an ACI class name composed?
- A. Package:ClassName
- B. ClassName: Method
- C. MitName: Method
- D. Method
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/rest_cfg/2_1_x/b_Cisco_APIC_REST_API_Configuration_Guide/b_Cisco_APIC_REST_API_Configuration_Guide_chapter_01.html
NEW QUESTION 38
After a Cisco Nexus switch interface is enabled and in the up state, an engineer must automate the configuration of the interface descriptions using the EEM Python Module Drag and drop the steps the engineer must take from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION 39
Which Kubernetes container network interface provides intent-based networking from the same pane of glass that VMs and bare-metal servers are managed?
- A. Ingress CNI plug-in
- B. Calico CNI plug-in
- C. Contiv CNI plug-in
- D. ACI CNI plug-in
Answer: B
NEW QUESTION 40
Refer to the exhibit.
Which two Cisco UCS PowerTool commands provide this output? (Choose two.)
- A. Get-UcsRackUnit | Select-Object Dn
- B. Get-UcsServer | Select-Object Dn
- C. Get-UcsRack Systems | Select-Object Dn
- D. Get-UcsSystems | Select-Object Dn
- E. Get-UcsBlade | Select-Object Dn
Answer: B,E
NEW QUESTION 41
A file named myfunc.py has been edited. Drag and drop the steps from left that ensure that this file is committed to the local Git repository and verify its status into the correct order on the right. NOt all options are used.
Answer:
Explanation:
Explanation
git add .
git commit -m "new function"
git status
NEW QUESTION 42
Which two components are attributes of an ACI MIT managed object? (Choose two.)
- A. DN
- B. mo
- C. RN
- D. URL
- E. NI
Answer: A,C
NEW QUESTION 43
Which two statements describe the authentication method used with Cisco Intersight REST API Requests?
(Choose two.)
- A. The message body is encoded as a SHA256 hash if the message body is not empty and then signed with the API Key ID
- B. The REST API request contains a base64-encoded signature of the message content and headers.
- C. The incoming REST API request is challenged by the Cisco Intersight Web service with a request for the RSA private key
- D. The Cisco Intersight Web service verifies the signature of incoming request with the RSA public key for the API Key ID.
- E. The REST API request message body is encoded as a SHA384 hash and then signed with the API Key ID.
Answer: B,D
NEW QUESTION 44
Which Ansible pi ay hook creates a new VI AN 10 named Web?
- A. Option
- B. Option
- C. Option
- D. Option
Answer: B
NEW QUESTION 45
Which Cisco UCS PowerTool commands initiate a Cisco UCS Manager connection?
- A. Option
- B. Option
- C. Option
- D. Option
Answer: C
NEW QUESTION 46
What is the network bootstrap program used by Cisco NX-OS iPXE?
- A. iPXE-POAP
- B. Mini-OS
- C. NX-OS iPXE
- D. NETBOOT
Answer: D
Explanation:
Reference:
https://developer.cisco.com/docs/nx-os/#!pxe-process
NEW QUESTION 47
Which two statements about gRPC are true? (Choose two )
- A. It is an IETF standard
- B. It is an IETF draft
- C. It is an open source initiative
- D. It runs over HTTPS
- E. It runs over SSH
Answer: B,D
NEW QUESTION 48
Refer to the exhibit.
What results from the EEM script that runs on a Cisco Nexus 9000 switch?
- A. Module 1 is reloaded if one of the specified syslog patterns occurs within 120 seconds.
- B. Module 1 is reloaded if all of the specified syslog patterns occur within 120 seconds.
- C. Module 1 is reloaded if one of the specified console patterns occurs within 120 seconds.
- D. The message "reload module 1" is printed if one of the specified syslog patterns occurs within 120 seconds
Answer: D
NEW QUESTION 49
Refer to the exhibit.
Which change allows the code to configure VLAN 10 in the Cisco UCS?
- A. Line 13 should include "handle.commit()".
- B. Line 4 should include transport 443 option.
- C. Line 3 should add an import for query_dn.
- D. Lines 8 and 9 should have a line continuation \ at the end.
Answer: B
Explanation:
Section: Data Center Compute
NEW QUESTION 50
......
Online Questions - Valid Practice 300-635 Exam Dumps Test Questions: https://theexamcerts.lead2passexam.com/Cisco/valid-300-635-exam-dumps.html