Pass Exam With Full Sureness - NSE5_FSM-6.3 Dumps with 52 Questions
Verified NSE5_FSM-6.3 dumps Q&As - 100% Pass from Lead2PassExam
NEW QUESTION # 31
How was the FortiGate device discovered by FortiSIEM?
- A. Through GUI log discovery
- B. using the pull events method
- C. Through auto lag discovery
- D. Through syslog discovery
Answer: C
NEW QUESTION # 32
Refer to the exhibit.
It events are grouped by Event Type and User attributes in FortiSIEM. how many results will be displayed?
- A. Eight results will be displayed.
- B. Four results will be displayed.
- C. No results will be displayed.
- D. Two results will be displayed.
Answer: B
Explanation:
Grouping Events in FortiSIEM: Grouping events by specific attributes allows administrators to aggregate and analyze data more efficiently.
Grouping Criteria: In this case, the events are grouped by "Event Type" and "User" attributes.
Unique Combinations: To determine the number of results displayed, identify the unique combinations of the
"Event Type" and "User" attributes in the provided data.
* Failed Logon by Ryan(appears multiple times but is one unique combination)
* Failed Logon by John
* Failed Logon by Paul
* Failed Logon by Wendy
Unique Groupings: There are four unique groupings based on the given data: "Failed Logon" by "Ryan",
"John", "Paul", and "Wendy".
References: FortiSIEM 6.3 User Guide, Event Management and Reporting sections, which explain how events are grouped and reported based on selected attributes.
NEW QUESTION # 33
In FortiSIEM enterprise licensing mode, if the link between the collector and data center FortiSIEM cluster a down what happens?
- A. The collector continues performance collection of devices, but stops receiving syslog
- B. The collector processes stop, and events are dropped
- C. The collector buffers events
- D. The collector drops incoming events like syslog, but slops performance collection
Answer: C
NEW QUESTION # 34
Refer to the exhibit.
How was the FortiGate device discovered by FortiSIEM?
- A. GUI log discovery
- B. Auto log discovery
- C. Pull events discovery
- D. Syslog discovery
Answer: D
Explanation:
Discovery Methods in FortiSIEM: FortiSIEM can discover devices using various methods, including syslog, SNMP, and others.
Syslog Discovery: The exhibit shows that the FortiGate device is discovered by FortiSIEM using syslog.
* Syslog Parsing: The syslog messages sent by the FortiGate device are parsed by FortiSIEM to extract relevant information.
* CMDB Entry: Based on the parsed information, an entry is populated in the Configuration Management Database (CMDB) for the device.
Evidence in Exhibit: The exhibit shows the syslog flow from the FortiGate Firewall to the parsing and discovery process, resulting in the device being listed in the CMDB with the status "Pending." References: FortiSIEM 6.3 User Guide, Device Discovery section, which explains how syslog discovery works and how devices are added to the CMDB based on syslog data.
NEW QUESTION # 35
Device discovery information is stored in which database?
- A. CMDB
- B. SVN DB
- C. Profile D8
- D. Event D8
Answer: A
NEW QUESTION # 36
In the rules engine, which condition instructs FortiSIEM to summarize and count the matching evaluated data?
- A. Aggregation
- B. Group By
- C. Filters
- D. Time Window
Answer: A
NEW QUESTION # 37
Device discovery information is stored in which database?
- A. CMDB
- B. Profile DB
- C. SVN DB
- D. Event DB
Answer: A
Explanation:
Device Discovery Information: Information about discovered devices, including their configurations and statuses, is stored in a specific database.
CMDB: The Configuration Management Database (CMDB) is used to store detailed information about the devices discovered by FortiSIEM.
* Function: It maintains comprehensive details about device configurations, relationships, and other metadata essential for managing the IT infrastructure.
Significance: Storing discovery information in the CMDB ensures that the FortiSIEM system has a centralized repository of device information, facilitating efficient management and monitoring.
References: FortiSIEM 6.3 User Guide, Configuration Management Database (CMDB) section, which details the storage and usage of device discovery information.
NEW QUESTION # 38
What are the four categories of incidents?
- A. Performance, devices, high risk, and low risk
- B. Performance, availability, security, and change
- C. Devices, users, high risk, and low risk
- D. Security, change, high risk, and low risk
Answer: B
NEW QUESTION # 39
If an incident's status is Cleared, what does this mean?
- A. A security rule issue has been resolved.
- B. The incident was cleared by an operator.
- C. A clear condition set on a rule was satisfied.
- D. Two hours have passed since the incident occurred and the incident has not reoccurred.
Answer: C
Explanation:
Incident Status in FortiSIEM: The status of an incident indicates its current state and helps administrators track and manage incidents effectively.
Cleared Status: When an incident's status is "Cleared," it means that a specific condition set to clear the incident has been satisfied.
* Clear Condition: This is typically a predefined condition that indicates the issue causing the incident has been resolved or no longer exists.
Automatic vs. Manual Clearance: While some incidents may be cleared automatically based on clear conditions, others might be manually cleared by an operator.
References: FortiSIEM 6.3 User Guide, Incident Management section, detailing the various incident statuses and the conditions that lead to an incident being marked as "Cleared."
NEW QUESTION # 40
If an incident's status is Cleared, what does this mean?
- A. A security rule issue has been resolved.
- B. The incident was cleared by an operator.
- C. A clear condition set an a rule was satisfied.
- D. Two hours have passed since the incident occurred and the incident has not reoccurred.
Answer: C
NEW QUESTION # 41
An administrator defines SMTP as a critical process on a Linux server.
If the SMTP process is stopped, FortiSIEM would generate a critical event with which event type?
- A. Postfix-Mail-Slop
- B. Generic SMTP Process Exit
- C. PH_DEV_MON_PROC_STOP
- D. PH_DEV_MON_SMTP_STOP
Answer: C
NEW QUESTION # 42
Which protocol is almost always required for the FortiSIEM GUI discovery process?
- A. SNMP
- B. Telnet
- C. Syslog
- D. WMI
Answer: A
NEW QUESTION # 43
An administrator is using SNMP and WMI credentials to discover a Windows device. How will the WMI method handle this?
- A. WMI method will collect only DHCP logs.
- B. WMI method will collect only traffic and IIS logs.
- C. WMI method will collect security, application, and system events logs.
- D. WMI method will collect only DNS logs.
Answer: C
Explanation:
WMI Method: Windows Management Instrumentation (WMI) is a set of specifications from Microsoft for consolidating the management of devices and applications in a network.
Log Collection: WMI is used to collect various types of logs from Windows devices.
* Security Logs: Contains records of security-related events such as login attempts and resource access.
* Application Logs: Contains logs generated by applications running on the system.
* System Logs: Contains logs related to the operating system and its components.
Comprehensive Data Collection: By using WMI, FortiSIEM can gather a wide range of event logs that are crucial for monitoring and analyzing the security and performance of Windows devices.
References: FortiSIEM 6.3 User Guide, Data Collection Methods section, which details the use of WMI for collecting event logs from Windows devices.
NEW QUESTION # 44
Refer to the exhibit.
Which section contains the sortings that determine how many incidents are created?
- A. Aggregate
- B. Group By
- C. Actions
- D. Filters
Answer: A
Explanation:
Incident Creation in FortiSIEM: Incidents in FortiSIEM are created based on specific patterns and conditions defined within the system.
Group By Function: The "Group By" section in the "Edit SubPattern" window specifies how the data should be grouped for analysis and incident creation.
Impact of Grouping: The way data is grouped affects the number of incidents generated. Each unique combination of the grouped attributes results in a separate incident.
Exhibit Analysis: In the provided exhibit, the "Group By" section lists "Reporting Device," "Reporting IP," and "User." This means incidents will be created for each unique combination of these attributes.
References: FortiSIEM 6.3 User Guide, Rule and Pattern Creation section, which details how grouping impacts incident generation.
NEW QUESTION # 45
What does the Frequency field determine on a rule?
- A. How often the rule will evaluate the subpattern.
- B. How often the rule will trigger for the same condition.
- C. How often the rule will take a clear action.
- D. How often the rule will trigger.
Answer: B
Explanation:
Rule Evaluation in FortiSIEM: Rules in FortiSIEM are evaluated periodically to check if the defined conditions or subpatterns are met.
Frequency Field: The Frequency field in a rule determines the interval at which the rule's subpattern will be evaluated.
* Evaluation Interval: This defines how often the system will check the incoming events against the rule's subpattern to determine if an incident should be triggered.
* Impact on Performance: Setting an appropriate frequency is crucial to balance between timely detection of incidents and system performance.
Examples:
* If the Frequency is set to 5 minutes, the rule will evaluate the subpattern every 5 minutes.
* This means that every 5 minutes, the system will check if the conditions defined in the subpattern are met by the incoming events.
References: FortiSIEM 6.3 User Guide, Rules and Incidents section, which explains the Frequency field and how it impacts the evaluation of subpatterns in rules.
NEW QUESTION # 46
Which command displays the Linux agent status?
- A. Service linux-agent status
- B. Service fortisiem-linux-agent status
- C. Service fsm-linux-agent status
- D. Service Aa-linux-agent status
Answer: B
NEW QUESTION # 47
What is a prerequisite for a FortiSIEM supervisor with a worker deployment, using the proprietary flat file database?
- A. The event database must be on a local disk
- B. The CMDB database must be on NFS
- C. The event database must be on NFS
- D. The archive mount must be on a local disk
Answer: C
NEW QUESTION # 48
In FortiSIEM enterprise licensing mode, it the link between the collector and data center FortiSlEM cluster is down, what happens?
- A. The collector drops incoming events like syslog. but stops performance collection.
- B. The collector continues performance collection of devices, but slops receiving syslog.
- C. The collector buffers events
- D. The collector processes stop, and events ate dropped.
Answer: B
Explanation:
Enterprise Licensing Mode: In FortiSIEM enterprise licensing mode, collectors are deployed in remote sites to gather and forward data to the central FortiSIEM cluster located in the data center.
Collector Functionality: Collectors are responsible for receiving logs, events (e.g., syslog), and performance metrics from devices.
Link Down Scenario: When the link between the collector and the FortiSIEM cluster is down, the collector needs a mechanism to ensure no data is lost during the disconnection.
Event Buffering: The collector buffers the events locally until the connection is restored, ensuring that no incoming events are lost. This buffered data is then forwarded to the FortiSIEM cluster once the link is re- established.
References: FortiSIEM 6.3 User Guide, Data Collection and Buffering section, explains the behavior of collectors during network disruptions.
NEW QUESTION # 49
How isa subparttern for a rule defined?
- A. Filters Threshold Time Window definitions
- B. FiltersAggregation Time Window definitions
- C. Filters Group By definitions. Threshold
- D. Filters Aggregation. Group By definition
Answer: B
Explanation:
Rule Subpattern Definition: In FortiSIEM, a subpattern within a rule is used to define specific conditions and criteria that must be met for the rule to trigger an incident or alert.
Components of a Subpattern: The subpattern includes the following elements:
* Filters: Criteria to filter the events that the rule will evaluate.
* Aggregation: Conditions that define how events should be aggregated or grouped for analysis.
* Time Window Definitions: Specifies the time frame over which the events will be evaluated to determine if the rule conditions are met.
Explanation: Together, these components allow the system to efficiently and accurately detect patterns of interest within the event data.
References: FortiSIEM 6.3 User Guide, Rules and Patterns section, which explains the structure and configuration of rule subpatterns, including the use of filters, aggregation, and time window definitions.
NEW QUESTION # 50
To determine SNMP discovery issues, which is the best command from the backend?
- A. snmpwalk
- B. phSNMPTest
- C. snmptest
Answer: A
NEW QUESTION # 51
What is a prerequisite for FortiSIEM Linux agent installation?
- A. The Linux agent manager server must be installed
- B. The auditd service must be installed an the Linux server being monitored
- C. Both the web server and the audit service must be installed on the Linux server being monitored
- D. The web server must be installed an the Linux server being monitored
Answer: B
NEW QUESTION # 52
What are the minimum memory requirements for the FortiSIEM supervisor virtual appliance, when the proprietary flat file database is used?
- A. 16G8 RAM
- B. 24GB RAM
- C. 32GB RAM
- D. 64G8 RAM
Answer: B
NEW QUESTION # 53
Refer to the exhibit.
An administrator is trying to identify an issue using an expression bated on the Expression Builder settings shown in the exhibit however, the error message shown in the exhibit indicates that the expression is invalid.
Which is the correct expression?
- A. Matched Events(COUNT)
- B. (COUNT) Matched Events
- C. Matched Events COUNT()
- D. COUNT(Matched Events)
Answer: D
Explanation:
Expression Builder in FortiSIEM: The Expression Builder is used to create expressions for analyzing event data.
Correct Syntax: The correct syntax for counting matched events isCOUNT(Matched Events).
* Function:COUNTis a function that takes a parameter, in this case, "Matched Events," to count the number of occurrences.
Common Errors: Incorrect syntax, such as reversing the order or using parentheses improperly, can lead to invalid expressions.
References: FortiSIEM 6.3 User Guide, Expression Builder section, which explains the correct syntax and usage for creating valid expressions for event analysis.
NEW QUESTION # 54
What is the best discovery scan option for a network environment where ping is disabled on all network devices?
- A. Smart scan
- B. CMDB scan
- C. L2 scan
- D. Range scan
Answer: A
NEW QUESTION # 55
Refer to the exhibit.
If events are grouped by Reporting IP, Event Type, and user attributes in FortiSIEM, how ,many results will be displayed?
- A. Unique attribute cannot be grouped.
- B. Five results will be displayed.
- C. Seven results will be displayed.
- D. There results will be displayed.
Answer: C
Explanation:
Grouping Events: Grouping events by specific attributes allows for the aggregation of similar events.
Grouping Criteria: For this question, events are grouped by "Reporting IP," "Event Type," and "User." Unique Combinations Analysis:
* 10.10.10.10, Failed Logon, Ryan, 1.1.1.1, Web App
* 10.10.10.11, Failed Logon, John, 5.5.5.5, DB
* 10.10.10.10, Failed Logon, Ryan, 1.1.1.1, Web App(duplicate, counted as one unique result)
* 10.10.10.10, Failed Logon, Paul, 3.3.2.1, Web App
* 10.10.10.11, Failed Logon, Ryan, 1.1.1.15, DB
* 10.10.10.11, Failed Logon, Wendy, 1.1.1.6, DB
* 10.10.10.10, Failed Logon, Ryan, 1.1.1.15, DB
Result Calculation: There are seven unique combinations based on the specified grouping attributes.
References: FortiSIEM 6.3 User Guide, Event Management and Reporting sections, explaining how events are grouped and reported based on selected attributes.
NEW QUESTION # 56
......
NSE5_FSM-6.3 Dumps Full Questions - Exam Study Guide: https://theexamcerts.lead2passexam.com/Fortinet/valid-NSE5_FSM-6.3-exam-dumps.html