100% Reliable Microsoft 300-430 Exam Dumps Test Pdf Exam Material
Based on Official Syllabus Topics of Actual Cisco 300-430 Exam
Topics of Cisco 300-430: Implementing Cisco Enterprise Wireless Networks Exam
These core topics of 310-430 practice test listed below are general recommendations for the material that is likely to be used for the examination. However, on any delivery of the test, other similar topics could also appear. The guidelines below can update at any time without notice to better represent the contents of the 310-430 exam dumps pdf and for clarity purposes.
It is recommended that, where possible, the applicant use these courses and/or other resources to provide background information on the exam objectives. The syllabus for the Cisco 300-430: Implementing Cisco Enterprise Wireless Networks examination is listed below in detail for each section of 300-430 exam dumps:
- Capture Successful Client Authentications
- Implement AAA Services for FlexConnect Mode Wireless LANs (WLANs)
- Configure QoS in the Wireless Network for Voice and Video Services
- Customize Cisco Prime Infrastructure for Network Monitoring
- Configure Guest Services in the Wireless Network
- Implement Authentication, Authorization, and Accounting (AAA) Services for Central Mode WLANs
- Implementing and Troubleshooting Quality of Service (QoS) in Wireless Networks
- Capture a Successful AP Authentication
- Configure Bring Your Own Device (BYOD) in the Wireless Network
To prepare for the Cisco 300-430 exam, candidates can enroll in training courses offered by Cisco or other authorized training providers. The training courses cover all the topics included in the exam and provide candidates with hands-on experience in configuring and managing Cisco wireless networks. Candidates can also use practice exams to assess their knowledge and identify areas that require further study.
Cisco 300-430 (Implementing Cisco Enterprise Wireless Networks) Certification Exam is designed for professionals who want to validate their skills in implementing and managing wireless networks in an enterprise environment. 300-430 exam focuses on the latest technologies, best practices, and solutions for deploying and managing wireless networks that support high-availability, mobility, and security. Implementing Cisco Enterprise Wireless Networks certification exam is one of the most popular and highly respected credentials in the wireless networking industry.
NEW QUESTION # 50
Which component must be integrated with Cisco DNA Center to display the location of a client that is experiencing connectivity issues?
- A. Cisco Hyperlocation Module
- B. Cisco Mobility Services Engine
- C. Wireless Intrusion Prevention System
- D. Cisco Connected Mobile Experiences
Answer: D
Explanation:
NEW QUESTION # 51
A corporation is spread across different countries and uses MPLS to connect the offices. The senior management wants to utilize the wireless network for all the employees. To ensure strong connectivity and minimize delays, an engineer needs to control the amount of traffic that is traversing between the APs and the central WLC. Which configuration should be used to accomplish this goal?
- A. FlexConned mode with central switching enabled
- B. FlexConnect mode with central authentication
- C. FlexConnect mode with local authentication
- D. FlexConnect mode with OfficeExtend enabled
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/72/configuration/guide/cg/cg_flexconnect.html#wp1241304
NEW QUESTION # 52
The Cisco Hyperlocation detection threshold is currently set to -50 dBm. After reviewing the wireless user location, discrepancies have been noticed. To improve the Cisco Hyperlocation accuracy, an engineer attempts to change the detection threshold to -100 dBm. However, the Cisco Catalyst 9800 Series Wireless Controller does not allow this change to be applied. What actions should be taken to resolve this issue?
- A. Shutdown all radios on the controller, change the Cisco Hyperlocation detection range, and enable the radios again.
- B. Disable Cisco Hyperlocation, change the Cisco Hyperlocation detection threshold, and then enable it.
- C. Create a new profile on Cisco CMX with the new Cisco Hyperlocation detection range, and apply it on the WLAN.
- D. Place the APs to monitor mode, shutdown the radios, and then change the Cisco Hyperlocation detection threshold.
Answer: B
NEW QUESTION # 53
Which configured is applied to prevent the network from a Layer 2 flooding of multicast frames with a seamless transfer of multicast data to the client when roaming from one controller to another?
- A. Enable IGMP snooping on the WLC
- B. Enable multicast mode on the WLC
- C. Enable IGMPv3 on the central Layer 3 switch.
- D. Create multicast groups on the central Layer 3 switch.
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01011.html
NEW QUESTION # 54
Refer to the exhibit.
Which area indicates the greatest impact on the wireless network when viewing the Cisco CleanAir Zone of Impact map of interferers?
- A. C
- B. A
- C. D
- D. B
Answer: C
NEW QUESTION # 55
A network engineer observes a spike in controller CPU overhead and overall network utilization after multicast is enabled on a controller with 500 APs. Which feature connects the issue?
- A. multicast AP multicast mode
- B. controller IGMP snooping
- C. unicast AP multicast mode
- D. broadcast forwarding
Answer: C
NEW QUESTION # 56
Refer to the exhibit.
An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server. Which three steps are required for this configuration? (Choose three.)
- A. Configure a policy on ISE to allow devices to connect that validate the certificate.
https://mrncciew.com/2018/05/25/wgb-with-peap/ - B. Configure the certificate on the WLC.
- C. Configure WGB as a network device in ISE.
- D. Configure WLAN to authenticate using ISE.
- E. Configure the access point with the root certificate from ISE.
- F. Configure the certificate, WLAN, and radio interface on WGB.
Answer: A,D,F
NEW QUESTION # 57
Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?
- A. Policy Profile
- B. Flex Profile
- C. RF Profile
- D. AP Join Profile
Answer: D
NEW QUESTION # 58
An engineer must use Cisco AVC on a Cisco WLC to prioritize Cisco IP cameras that use the wireless network. Which element do you configure in a rule?
- A. WMM required
- B. rate-limit
- C. mark
- D. permit-ACL
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-8/AVC_8point8_dg.html
NEW QUESTION # 59
An engineer is setting up a WLAN to work with a Cisco ISE as the AAA server. The company policy requires that all users be denied access to any resources until they pass the validation. Which component must be configured to achieve this stipulation?
- A. CPU ACL
- B. AAA override
- C. WPA2 passkey
- D. preauthentication ACL
Answer: B
NEW QUESTION # 60
When using a Cisco Catalyst 9800 Series Wireless Controller, which statement about AutoQoS is true?
- A. It allows the output policy map to put specific QoS queues into specific subgroups
- B. It automates deployment of wired QoS and makes wireless QoS implementation easier
- C. It has a set of predefined profiles that you cannot modify further
- D. It matches traffic and assigns each matched packet to QoS groups
Answer: D
Explanation:
NEW QUESTION # 61
An engineer set up identity-based networking with ISE and configured AAA override on the WLAN. Which two attributes must be used to change the client behavior from the default settings? (Choose two.)
- A. DHCP timeout
- B. DSCP value
- C. multicast address
- D. IPv6 ACL
- E. DNS server
Answer: B,D
NEW QUESTION # 62
What is the default IEEE 802.1x AP authentication configuration on a Cisco Catalyst 9800 Series Wireless Controller?
- A. EAP-FAST with CAPWAP DTLS + port authentication
- B. EAP-PEAP with 802.1x port authentication
- C. EAP-TLS with 802.1x port authentication
- D. EAP-FAST with CAPWAP DTLS
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/ewc/1612/configguide/ewc_cg_16_12/802_1x_suppor
NEW QUESTION # 63
An engineer has successfully implemented 10 active RFID tags in an office environment. The tags are not visible when the location accuracy is tested on the Cisco CMX Detect and Locate window. Which setting on Cisco CMX allows the engineer to view the tags?
- A. Define an RFID group globally and add the tags.
- B. Enable RFID tags in tracking options
- C. Enable hyper location services for RFID.
- D. Enable probing clients for active tags.
Answer: B
NEW QUESTION # 64
A new MSE with wIPS service has been installed and no alarm information appears to be reaching the MSE from controllers. Which protocol must be allowed to reach the MSE from the controllers?
- A. SOAP/XML
- B. CAPWAP
- C. NMSP
- D. SNMP
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter NMSP (Network Mobility Services Protocol) - The protocol used for communication between Wireless LAN Controllers and the Mobility Services Engine. In the case of a wIPS Deployment, this protocol provides a pathway for alarm information to be aggregated from controllers to the MSE and for wIPS configuration information to be pushed to the controller. This protocol is encrypted.
https://www.cisco.com/c/en/us/td/docs/wireless/technology/wips/deployment/guide/WiPS_deployment_guide.ht
NEW QUESTION # 65
An engineer must implement rogue containment for an SSID. What is the maximum number of APs that should be used for containment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Explanation/Reference:
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/technology/roguedetection_deploy/ Rogue_Detection.html
NEW QUESTION # 66
Refer to the exhibit.
Which two items must be supported on the VoWLAN phones to take full advantage of this WLAN configuration? (Choose two.)
- A. 802.11e
- B. TSPEC
- C. WMM
- D. SIFS
- E. APSD
Answer: A,C
NEW QUESTION # 67
After looking in the logs, an engineer notices that RRM keeps changing the channels for non-IEEE 802. 11 interferers. After surveying the area, it has been decided that RRM should not change the channel. Which feature must be enabled to ignore non-802.11 interference?
- A. Avoid Persistent Non-WIFI Interference
- B. Avoid Cisco AP Load
- C. Avoid Non-802. 11 Noise
- D. Avoid Foreign AP Interference
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/configure-guide/b_wi_16_10_cg/radio-resource-management.html Check the Avoid Non-802.11a (802.11b) Noise check box to cause the controller's RRM algorithms to consider noise (non-802.11 traffic) in the channel when assigning channels to lightweight access points, or uncheck it to disable this feature. For example, RRM may have access points avoid channels with significant interference from nonaccess point sources, such as microwave ovens. The default value is selected.
Check the Avoid Persistent Non-WiFi Interference check box to configure the controller to stop ignoring persistent non-Wi-Fi interference in new channel calculation. The persistent non-Wi-Fi interference is considered during the metric calculation for channels.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-6/config-guide/b_cg86/radio_resource_management.html
NEW QUESTION # 68
......
Free 300-430 Dumps are Available for Instant Access: https://theexamcerts.lead2passexam.com/Cisco/valid-300-430-exam-dumps.html