Cisco 300-430 Dumps - 100% Cover Real Exam Questions (Updated 218 Questions)
Real 300-430 dumps - Real Cisco dumps PDF
How to book the Cisco 300-430: Implementing Cisco Enterprise Wireless Networks Exam
Typically, up to six weeks in advance and as late as the same day, you can schedule an exam. You must follow these steps to participate in the Implementing Cisco Service Provider Advanced Routing Solutions 300-430 exam test:
- Step 1: Visit the Pearson VUE website by clicking here
- Step 3: Login or create an account
- Step 3: Enter the exam number i.e., 300-430
- Step 3: Follow the details on the website
- Step 4: Pay for your exam via credit card or exam vouchers
Cisco 300-430 exam covers a range of topics related to wireless networking, including planning and designing wireless networks, configuring and troubleshooting wireless infrastructure, implementing advanced security protocols, and integrating wireless networks with other network infrastructure components. 300-430 exam is designed to test a candidate's ability to implement and manage wireless networks in a highly secure and efficient manner. Implementing Cisco Enterprise Wireless Networks certification is recognized globally and is highly respected in the networking industry.
Cisco 300-430 exam is designed for IT professionals who are looking to validate their knowledge and skills in implementing Cisco enterprise wireless networks. 300-430 exam is part of the requirements for obtaining the Cisco Certified Specialist - Enterprise Wireless Implementation certification. Implementing Cisco Enterprise Wireless Networks certification is intended for individuals who have a solid understanding of wireless networking concepts and can design, implement, and troubleshoot wireless networks in an enterprise environment.
NEW QUESTION # 129
A Cisco CMX 3375 appliance on the 10.6.1 version code counts duplicate client entries, which creates wrong location analytics. The issue is primarily from iOS clients with the private MAC address feature enabled. Enabling this feature requires an upgrade of the Cisco CMX 3375 appliance in a high availability pair to version 10.6.3. SCP transfers the Cisco CMX image, but the upgrade script run fails. Which configuration change resolves this issue?
- A. Save configuration and use the upgrade script to upgrade the high availability pair without breaking the high availability.
- B. Upgrade the high availability pair to version 10.6.2 image first and then upgrade to version 10.6.3.
- C. Break the high availability using the cmxha config disable command and upgrade the primary and secondary individuality.
- D. Run root patch to first upgrade to version 10.6.2 and then migrate to version 10.6.3.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/support/docs/availability/high-availability/213664-configure-cmx-high-availability.html
NEW QUESTION # 130
The CTO of an organization wants to ensure that all Android devices are placed into a separate VLAN on their wireless network. However, the CTO does not want to deploy ISE. Which feature must be implemented on the Cisco WLC?
- A. WLAN local policy
- B. custom AVC profile
- C. AAA override
- D. RADIUS server overwrite interface
Answer: A
NEW QUESTION # 131
Refer to the exhibit.
An engineer deployed a Cisco WLC using local EAP. Users who are configured for EAP-PEAP cannot connect to the network. Based on the local EAP debug controller provided, why is the client unable to connect?
- A. The client is falling to accept certificate.
- B. The Cisco WLC is configured for the incorrect date.
- C. The Cisco WLC local EAP profile is misconfigured
- D. The user is using invalid credentials.
Answer: A
NEW QUESTION # 132
Refer to the exhibit.
A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101 and 10.3.10.102. All BYOD devices connecting to WLAN on VLAN63 have been incorrectly profiled and areassigned as unknown profiled endpoints. Which action efficiently rectifies the issue according to Ciscorecommendations?
- A. Keep DHCP proxy enabled on the Cisco WLC and define helper-address under the VLAN interface to pointto the two ISE servers.
- B. Nothing needed to be added on the Cisco WLC or VLAN interface. The ISE configuration must be fixed.
- C. Disable DHCP proxy on the Cisco WLC.
- D. Disable DHCP proxy on the Cisco WLC and run the ip helper-address command under the VLANinterface to point to DHCP and the two ISE servers.
Answer: D
NEW QUESTION # 133
What is an important consideration when implementing a dual SSID design for BYOD?
- A. SSIDs for this setup must be configured with NAC State-RADIUS NAC for the clients to authenticate with Cisco ISE, or with NAC State-ISE NAC for Cisco ISE to associate the client.
- B. If multiple WLCs are used, the WLAN IDs must be exact for the clients to be provisioned and traverse the network correctly.
- C. After using the provisioning SSID, an ACL that used to make the client switch SSIDs forces the user to associate and traverse the network by MAC filtering.
- D. One SSID is for provisioning and the other SSID is for gaining access to the network. The use of an ACL should not be enforced to make the client connect to the REAL SSID after provisioning.
Answer: D
Explanation:
NEW QUESTION # 134
An engineer has been hired to implement a way for users to stream video content without having issues on the wireless network. To accomplish this goal, the engineer must set up a reliable way for a Media Stream to work between Cisco FlexConnect APs. Which feature must be enabled to guarantee delivery?
- A. Multicast Direct
- B. IGMP Direct
- C. Unicast Direct
- D. Multicast-Unicast Direct
Answer: A
NEW QUESTION # 135
On a branch office deployment, it has been noted that if the FlexConnect AP is in standalone mode and loses connection to the WLC, all clients are disconnected, and the SSID is no longer advertised. Considering that FlexConnect local switching is enabled, which setting is causing this behavior?
- A. 802.11r Fast Transition is enabled
- B. FlexConnect Local Auth is disabled
- C. ISE NAC is enabled
- D. Client Exclusion is enabled
Answer: B
Explanation:
NEW QUESTION # 136
Refer to the exhibit.
An engineer is creating an ACL to restrict some traffic to the WLC CPU. Which selection must be made from the direction drop-down list?
- A. To have the complete list of options, the CPU ACL must be created only by the CLI.
- B. Packet direction has no significance; it is always Any.
- C. It must be Outbound because it is traffic that is generated from the WLC.
- D. It must be Inbound because traffic goes to the WLC.
Answer: D
Explanation:
NEW QUESTION # 137
An engineer must implement Cisco Identity-Based Networking Services at a remote site using ISE to dynamically assign groups of users to specific IP subnets. If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote site must be tunneled back to the WLC. Which feature meets these requirements?
- A. learn client IP address
- B. VLAN-based central switching
- C. FlexConnect local authentication
- D. central DHCP processing
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/Enterprise-Mobility-8-5-Design-Guide/Enterprise
NEW QUESTION # 138
When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?
- A. config flexconnect group BranchA-FCG vlan 30 add
- B. config flexconnect BranchA-FCG vlan add 30
- C. config flexconnect BranchA-FCG vlan 30 add
- D. config flexconnect group BranchA-FCG vlan add 30
Answer: D
Explanation:
NEW QUESTION # 139
Which feature on the Cisco Wireless LAN Controller must be present to support dynamic VLAN mapping?
- A. FlexConnect ACL
- B. CCKM/OKC
- C. AAA override
- D. VLAN name override
Answer: C
Explanation:
NEW QUESTION # 140
A customer managing a large network has implemented location services. Due to heavy load, it is needed to load balance the data coming through NMSP from the WLCs. Load must be spread between multiple CMX servers to help optimize the data flow for APs. Which configuration in CMX meets this requirement?
- A. cmxctl config feature flags nmsplb.cmx-loadbalance true
- B. cmxctl config feature flags nmsplb.cmx-ap-grouping true
- C. cmxctl config feature flags nmsplb.cmx-rssi-distribute true
- D. cmxctl config feature flags nmsplb.cmxgrouping true
Answer: D
Explanation:
NEW QUESTION # 141
Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?
- A. RF Profile
- B. Policy Profile
- C. AP Join Profile
- D. Flex Profile
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/cisco-hyperlocatio
NEW QUESTION # 142
An engineer configures a Cisco Aironet 600 Series OfficeExtend AP for a user who works remotely. What is configured on the Cisco WLC to allow the user to print a printer on his home network?
- A. split tunneling
- B. FlexConnect
- C. AP failover priority
- D. SE-connect
Answer: A
Explanation:
NEW QUESTION # 143
CMX Facebook WiFi can allow access to the network before authentication. Which two of the following options are available? (Choose two)
- A. Allow HTTPs traffic only before authentication and block all other traffic.
- B. Allow all the traffic before authentication and intercept HTTP only.
- C. Allow HTTP traffic only before authentication and block all the traffic.
- D. Allow SNMP traffic only before authentication and block all the traffic.
- E. Allow all the traffic before authentication and intercept HTTPs only.
Answer: B,C
Explanation:
Explanation/Reference:
NEW QUESTION # 144
What is the difference between PIM sparse mode and PIM dense mode?
- A. Sparse mode floods. Dense mode uses distribution trees.
- B. Sparse mode supports only one switch. Dense mode supports multiswitch networks.
- C. Sparse mode supports multiswitch networks. Dense mode supports only one switch.
- D. Sparse mode uses distribution trees. Dense mode floods.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16/imc-pim-xe-16-book/imc-tech-oview.html In Sparse mode packets branches distribution growth as new nodes join the multicast group. https://community.calix.com/s/article/Dense-Mode-Multicast-vs-Sparse-Mode-Multicast-1
NEW QUESTION # 145
An engineer must enable LSS for the Apple TV mDNS service only when ORIGIN is set to Wired. Which action meets this requirement?
- A. Set ORIGIN to Wired. Enable LSS by using the config mdns service Iss All command
- B. Set ORIGIN to either Wireless or All. Enable LSS by using the config mdns service Iss All command.
- C. Set ORIGIN to Wired. Enable LSS by using the config mdns service Iss Apple TV command.
- D. Set ORIGIN to either Wireless or All. Enable LSS by using the config mdns service Iss enable Apple TV command
Answer: C
NEW QUESTION # 146
......
Realistic Lead2PassExam 300-430 Dumps PDF - 100% Passing Guarantee: https://theexamcerts.lead2passexam.com/Cisco/valid-300-430-exam-dumps.html